Limited Time SaleUS$18.19 cheaper than the new price!!
| Management number | 212842468 | Release Date | 2026/04/12 | List Price | US$12.12 | Model Number | 212842468 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Features and Benefits: The Hail Hammer is a Dent Hammer with an interchangeable tip for some DENT which is irregular. Suitable for the dent of all kinds of flat metal , Auto metal Doors and refrigerator. By the Hail hammer can quickly repair auto-body dents. By the Hail hammer does not damage the original paint. By the Hail hammer has the advantages of simple operation. How to use paintless dent repair kits ? Clean the dent with a clean wet cloth; Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is); Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue); Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue coolfor about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; Clean the repaired place with a clean wet cloth. Package included: 1X Dent Hammer 9X Heads
| Manufacturer | Ting Ao |
|---|---|
| Is Discontinued By Manufacturer | No |
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form